Hemming Stitch – Best Hand Stitches for Hems

Learn how to do hemming stitch. Would you like to be able to make a hem that hangs beautifully and looks very professional? A hand-stitched hem is a way to go! It may sound tedious in this modern world of technology and speed but hand stitching a hem is really worth the effort especially if you want an invisible result.

Hemming StitchPin
Hemming Stitch

Hemming Stitch Tutorial

The hem of a garment is a very important part of the finished product. There is a wide range of hemming stitches to complement the finish of a dress, blouse, or pair of pants. Hems can be decorative or almost invisible, but the best hems are sewn by hand. You can read more in my article on how to sew a hem.

The stitches listed below will give your handiwork the perfect finishing touch.

In all my samples I have used contrasting red stitching. For invisible stitching, use a matching color thread.

Hemming StitchPin
Hemming Stitch

How to Do Hemming Stitch

Here are 7 ways to do a hemming stitch.

  1. Catch Stitch
  2. Blind Hem Stitch
  3. Slip Stitch
  4. Filled Stitch
  5. Whip Stitch
  6. Hand Rolled Hem Stitch
  7. Running Stitch

My photos include a shot of the front and back of the hem so you can make the best decision on the hand sewing style that you prefer.

How to Hand Sew a Hem Step by Step Instructions

Before you start the hemming stitch, you need to press the hem.

  • On the wrong side, press up the raw edge by ¼ inch (6mm). Your sewing pattern may specify a different amount.
  • Press over the hem a second time by the hem allowance.
  • You are now ready to sew.

All of these hemming stitch options are easy but if you have never sewn a hem before then go straight to the easiest which is the running stitch.

1. Catch Hemming Stitch

The catch stitch is a good choice for a hemming stitch on knits because it has a certain amount of elasticity and stretch. The cross-over of the stitch adds strength and durability.

DIRECTION – Work the stitch from left to right.

Step 1 – Anchor your thread in the fold of the hem and have the needle pointing to the left. Pick up a small piece of fabric on the wrong side of the garment. Work just above the hem. Make your stitch very small because it will be seen on the outside.

Step 2 – Pull up your thread and move the needle and thread to the right ¼” -½” (6-12mm) distance and catch a little piece of the hem with the needle facing left.

Continue in this way and as you work you will see the thread crossing over to make the next stitch. Remember to use cotton as close in color to the fabric because a small ‘catch’ stitch will be seen on the right side of the garment.

Further reading: Catch Stitch

Hemming Stitch - Catch StitchPin
Hemming Stitch – Catch Stitch

2. Blind Hemming Stitch

The blind hemming stitch is a very professional way to create a hem on pants.

Step 1 – Measure and fold a double hem to suit the required length of your garment. Blind stitch hems are usually wider so I did 2 folds of 1 inch (2.5cm).

Then fold the folded hem back to the right side of the garment and leave about ⅛” (3mm) showing over the top of the folded fabric. This is the fold of the hem you will be working in.

Step 2 – Anchor your thread in the hem and start to work from right to left. With your needle, catch a small piece of the fabric in the folded edge of the garment. This is to be next to but not inside the hem.

This small stitch will be visible on the right side when the hem is complete. Check to be sure you only pick up one layer of fabric to make this small stitch.

Step 3 – Move the needle about ½” (12mm) to the left and pick up a small stitch in the hem of the garment. The threads will be concealed in the fold of the hem. Continue in this way to the end of the hem.

Step 4 – Fold the hem down again and press on top of the hem. The only visible stitch will be the small amount of fabric caught up in the stitch on the right side.

The alternative to using a hand hemming stitch is to use the blind hem foot on your sewing machine.

  Hemming Stitch - Blind Hem Stitch Pin
Hemming Stitch – Blind Hem Stitch

3. Slip Hemming Stitch

The slip hemming stitch looks good on both sides of the garment and is a commonly used stitch.

Step 1 – Prepare a double fold hem. The size of your hem will depend on your personal choice for the finished length. This stitch works equally well on a wide or narrow hem. Start to stitch on the upper fold, working from right to left.

Step 2 – Insert the needle into the main fabric. Make sure you keep the stitch level with the fold of the hem. The tiny stitch you make will be visible on the right side. Pull up your threads to make the stitches taut but not puckered as you sew.

Step 3 – Insert the needle into the fold and pass the needle along inside the fold. Pass the needle and thread along the fold for a short distance. Pull the needle out to the fabric side under the fold of the hem.

Step 4 – Pick up another small dot of fabric from the garment. Continue in this way for the length of the hem. End off in the hem fold at the end.

It is important to measure the space between the amount of fabric taken in the fold and the amount taken in the small dot to make sure the stitches are evenly spaced. Mark with a removable pen if this makes it easier to keep an equal distance.

    Hemming Stitch - Slip Stitch  Pin
Hemming Stitch – Slip Stitch

4. Filled Hemming Stitch

The felled hemming stitch shows on the outside of the fabric. This stitch copes well with bulkier fabrics as it can be hidden in the pile of a thicker fabric. If the garment is to be lined the lining shields the long stitches from view.

Step 1 – Prepare the hem and anchor the thread on the wrong side to begin working from right to left.

Step 2 – Make a stitch from the folded edge of the hem to run through the fabric for about ¼” – ½” (6-12mm) into the fabric and come out again at the folded hem edge. Stitch into the hem with a small stitch and then repeat the stitch that goes through the fabric and returns through at the hem fold.

Step 3 – Continue this way and a series of slightly slanted stitches are formed on the right side of the work and the smaller anchor stitch appears on the folded edge of the hem. The longer outside stitch will be concealed in the lining if a lining is used.

      Hemming Stitch - Felled Stitch   Pin
Hemming Stitch – Felled Stitch

5. Whip Stitch Hems

Whipstitch is a simple stitch for hems that need more control. The stitches are smaller and closer together and you will see small long stitches on the outside.

Step 1: Prepare the hem by pressing it over twice.

Step 2: Place the needle in the main fabric and bring it up at an angle through the fold of the hem.

Step 3: Repeat keeping the stitches even.

Further reading: How to do Whip Stitch

        Hemming Stitch - Whip Stitch    Pin
Hemming Stitch – Whip Stitch

6. Hand Rolled Hem Stitch

The hand-rolled hem is ideal for finishing sheer fabrics or very lightweight materials. It does not work well with thicker fabrics. Use with soft lines, silks, and cotton.

Step 1 – Prepare the hem by creasing one fold along the hem edge with your thumb or finger. Make a narrow fold close to the edge to keep any bulk away from the hem.

Step 2 – You will be working the hem in small stages from right to left. Secure the thread with a few back stitches. It is best not to use a knot with fine fabric as it may show and spoil the delicate look of the hem.

Step 3 – Start the hemming by making a small slanted stitch into the fabric just above the hem. Then slant into the hem and take another stitch in the hem. Repeat this without pulling the threads and working between the hem edge and the fabric.

See in the photo below how the needle makes a small down and up stitch first through the fabric and then at the edge of the hem.

Step 4 – After you have completed 3 or 4 stitches pull the thread gently but not too tight. This will make the hem roll in gently as it forms the hem and encloses the raw edges. Repeat.

    Hemming Stitch - Rolled Hem StitchPin
Hemming Stitch – Rolled Hem Stitch

7. Running Stitch Hems

Step 1 – Prepare your hem to the required width. Press and pin in place.

Step 2 -Thread your needle with matching or contrast thread. The running stitch can be decorative as well as just utilitarian.

Step 3 – Knot your thread and start with a slip stitch in the fold of the hem. Continue to fasten the hem with simple running stitches following the fold of the hem. Choose the length of the running stitch to suit the purpose of the garment.

Further reading: How to do Running Stitch

  Hemming Stitch - Running Stitch Pin
Hemming Stitch – Running Stitch

Tips to Create a Professional Hemming Stitch

  1. Hang the overnight garment to give the hem a chance to ‘drop’ before sewing. This is especially important for a bias cut hem.
  2. Try to hem with a single thread. Hemming stitches need to be almost invisible and this is aided by a thinner thread. I used double thread in my sample photos as I needed the stitches to be thicker so they would show up in a photo.
  3. Mark your hem with a sewing gauge or a tape measure.
  4. Measure from the floor to the hem to ensure the hem is straight in line with the ground level. The hem will look straight if lined up with the flat surface of the floor.
  5. Keep an eye on the width of the hem. A rolled hem, for example, needs to be thin while other hems may need to be broader to help the skirt drop and hang nicely.

Decorative Hem Suggestions

There are many decorative hemming stitch suggestions. Depending on the decoration or the stitch, hems can be embroidered, scallopedor even tasked.

Blanket stitch is often the stitch used to attach a crochet edge or create a scalloped hem. Beaded, braided, and fringed – there are many options for the simple hem.

    Hemming Stitch - Blanket StitchPin
Hemming Stitch – Blanket Stitch

Hemming Stitch FAQs

What is Hemming Stitch

A hemming stitch is a hand or machine stitch used to hold a hem in place. Depending on the stitch you use, it can be invisible or show on the outside of a garment. Machine hems are commonly sewn with a straight stitch and hand-stitched hems are usually sewn with a blind or invisible stitch.

What is the Best Stitch to Use for a Hem?

The best stitch to use for a hem sewn on your sewing machine is a straight stitch with a medium length. If you are hand sewing, then the best stitch to use is a slip hemming stitch or blind hemming stitch. These stitches are almost invisible on the outside of a garment.

Hemming Stitch – In Conclusion

Although the hem of the dress or sleeve edge is the last part of the process it does not have to be a dull finishing portion of the garment. The hem can be the finale, the last pizazz of the garment, and an opportunity to be creative.

‘Great is the art of the beginning, but greater is the art of the ending.’ (Henry Wadsworth Longfellow.)

In the end, dressmaking is an art form. The dressmaker sews a beautiful garment. The hem is the ending and tribute to the whole creation.

More Hem Articles

  1. GENERAL HEMSHow to Sew a Hem (This is the best article to read if you are not sure what kind of hem you need. It gives a rundown of all the most common types)
  2. NARROW HEMSSew a Narrow Hem
  3. ROLLED HEM FOOTHow to Use a Rolled Hem Foot
  4. WIDE HEMSHow to Sew Wide Hems
  5. CIRCULAR HEMSHow to Sew Round Hems
  6. BLIND HEMSHow to Sew a Blind Hem
  7. RUFFLED HEMSLettuce Hems
  8. KNIT FABRIC HEMSHow to Hem Knit Fabric, Catch Stitch
  9. KNIT HEMSTwin Needle
  10. SQUARE HEMSHow to Sew Mitered Corners
  11. HAND HEMSHemming Stitch
  12. NO SEW HEMSHow to Use Hemming Tape
  13. SIMPLE HEMSSingle Fold Hems
  14. DOUBLE HEMSDouble Fold Hems
  15. BIASBias Tape Hems
  16. SCALLOPSScalloped Edges
  17. INVISIBLE HEMSBlind Hem Stitch

Leave a Comment